姓名

吴玉娜

性别

女

民族

汉

籍贯

浙江诸暨

最高学历

研究生

最高学位

博士

政治面貌

中共党员

技术职称

副教授

通讯地址

南京市河海大学江宁校区乐学楼1217室

常州市河海大学金坛校区56号楼357室

电话

13585199947

Email

wuyuna@hhu.edu.cn

wuyu_na@126.com

吴玉娜，工学博士，河海大学力学与材料学院副教授，硕士生导师。2014年07月获东南大学材料科学与工程专业博士学位，同年12月进入河海大学力学与材料学院从事博士后研究，2017年1月留校任教。主要从事高性能铝合金、铜合金、超细晶/纳米晶/混晶合金相关的设计研究工作。主持国家自然科学基金、江苏省自然科学基金、中国博士后科学基金、江苏省博士后科学基金、泰州市科技支撑计划、宿迁市重点研发计划、南通市科技项目、中央高校业务费等课题；并参与国家自然科学基金、江苏省重点研发计划等课题。迄今为止，已在国内外重要期刊及学术会议共发表学术论文50余篇，其中以第一/通讯作者在《Journal of Materials Science and   Technology》、《Journal of Alloys and Compounds》、《Materials and Design》、《Materials Science and Engineering A》等SCI期刊发表论文20余篇；授权国家发明专利10项。入选“河海大学大禹学者计划”。

热忱欢迎校内外材料科学与工程（金属材料）相关专业的学生报考本人的研究生。

研究方向

1. 高性能铝合金

2. 高性能铜合金

3. 铝基复合材料

学习和工作经历

2023.10至今，河海大学，材料科学与工程学院，副教授

2020.07-2023.10，河海大学，力学与材料学院，青年副教授

2017.01-2020.07，河海大学，力学与材料学院，讲师

2014.12-2016.12，河海大学，力学与材料学院，博士后

2008.09-2014.07，东南大学，材料科学与工程学院，博士（硕博连读）

2004.09-2008.06，南京工业大学，材料科学与工程学院，学士

承担的科研项目

1.国家自然科学基金青年项目（52303390）        负责人      2024-2026

2.中央高校基本科研业务费项目（B230201002）      负责人     2023-2024

3.江苏省自然科学基金青年项目（BK20180508）      负责人      2018-2021

4.泰州市科技支撑计划（薄壁高强韧铝合金活塞的制备及关键技术研究）  负责人    2020-2022

5.宿迁市重点研发计划（大数据驱动的超高强高韧铝合金板材研发及强韧化机制研究） 负责人  2020-2022

6.南通市科技项目（JC2020129）           负责人  2020-2022

7.中央高校基本科研业务费项目（B210202102）    负责人  2021-2022

8.中国博士后科学基金面上项目（2021M690860）    负责人  2020-2021

9.中央高校基本科研业务费项目（2017B01314）     负责人  2018-2019

10.中国博士后科学基金面上项目（2016M591753）    负责人  2015-2016

11.江苏省博士后科学基金项目（1501018B）       负责人  2015-2016

12.横向课题（20168000716）              负责人  2015-2016

13.横向课题（20168000716）             负责人  2015-2016

代表性SCI论文

1.      Yumeng Chen, Yuna Wu^*, Jun. Geng, Huan Liu, Dan Song, Jinghua Jiang,   Feng Fang^*,   Aibin Ma, Pre-precipitating promoted by microshear bands effectively   circumvents strength-ductility trade-off of RT-rolled Al-6Zn-1Mg alloy, Journal   of Materials Research and Technology, 28 (2024) 2767-2777.

2.      Yumeng Chen, Yuna Wu^*, Yun Li, Zhiyang Peng, Huan Liu, Aibin Ma,   Jinghua Jiang, Ting Yuan^*,   RT ECAP and rolling bestow high strength and good ductility on a low lithium   aluminum alloy, Journal of Materials Research and Technology, 25   (2023) 5561-5574.

3.      Xiaoru Zhuo, Quan Zhang, Huan Liu, Zhichao   Hu, Peng Zhang, Jinghua Jiang, Aibin Ma, Yuna Wu^*, Enhanced tensile strength and ductility   of an Al-6Si-3Cu alloy processed by room temperature rolling, Journal of Alloys & Compounds, 899   (2022) 163321.

4.      Quan Zhang, Yuna Wu^*, Tianfei Li, Chao Qiu, Shengqing Wang, Fujun   Fan, Hang Teng, Changmei Liu, Huan Liu, Aibin Ma, Jinghua Jiang, Significant   enhancement in tensile strength of room-temperature rolled Al-8Zn-1Mg alloy   induced by profuse microbands, Materials   Science and Engineering A, 861 (2022) 144359.

5.      Hengcheng Liao^*, Yuna   Wu^*, H. Chen, L. Qian, Divorced eutectic solidification   in hypereutectic Al-Si Alloys, Metallurgical and Materials Transactions A,   53 (2022) 2346-2350.

6.      Xiaoru Zhuo, Haichao Xu, Yuna Wu^*, Zhichao Hu, Jinghua Jiang, Aibin Ma,   Effect of eutectic Si size on the flow behavior and hot processing map of   near eutectic Al-Si alloys, Journal of Materials Research and Technology,   15 (2021) 5694-5705.

7.      Yuna Wu,   Changmei. Liu, Hengcheng Liao^*,   Jinghua Jiang^*,   Aibin Ma, Joint effect of micro-sized Si particles and nano-sized dispersoids   on the flow behavior and dynamic recrystallization of near-eutectic Al-Si   based alloys during hot compression, Journal   of Alloys & Compounds, 856 (2021) 158072.

8.      Yuna Wu,   Hengcheng Liao^*,   Yunyi Tang, Enhanced high-cycle fatigue strength of Al-12Si-4Cu-1.2Mn-T6 cast   aluminum alloy at room temperature and 350℃, Materials Science and Engineering A, 825 (2021) 141917.

9.       Yuna   Wu, Hengcheng Liao^*,   Changelve Lv, Dynamic precipitation and recrystallization in Al-12.5wt%Si-0.6wt%Mg-0.1wt%Ti   alloy during hot-rolling and their impacts on mechanical properties, Journal of Alloys & Compounds,   788 (2019) 125-135.

10.  Yuna Wu, Jianfeng Zhang^*, Hengcheng Liao, Gaiye. Li, Development of   high performance near eutectic Al-Si-Mg alloy profile by micro alloying with   Ti, Journal of Alloys & Compounds,   660 (2016) 141-147.

11.  Yuna Wu, Jianfeng Zhang^*, Hengcheng Liao, Yongjin. Wang, Yuping.   Wu, Effect of Homogenization Temperature on Microstructure and Conductivity   of Al-Mg-Si-Ce Alloy, Journal of   Materials Engineering and Performance, 25 (2016) 2720-2726.

12.  Yuna Wu, Hengcheng Lia^*o, Kexin Zhou, Jian Yang, Effect of texture   evolution on mechanical properties of near eutectic Al-Si-Mg alloy with minor   addition of Zr/V during hot extrusion, Materials   & Design. 57 (2014) 416-420.

13.  Yuna Wu, Hengcheng Liao^*, Kexin Zhou, Effect of minor addition of vanadium   on mechanical properties and microstructures of as-extruded near eutectic   Al-Si-Mg alloy, Materials Science and   Engineering A. 602 (2014) 41-48.

14.  Yuna Wu, Hengcheng Liao^*, Kexin. Zhou, Dynamic precipitation of Mg₂Si   induced by temperature and strain during hot extrusion and its impact on   microstructure and mechanical properties of near eutectic Al-Si-Mg-V alloy, Materials Science and Engineering A,   614 (2014) 162-170.

15.  Yuna Wu, Hengcheng Liao^*, Corrosion Behavior of Extruded near   Eutectic Al-Si-Mg and 6063 Alloys, Journal   of Materials Science & Technology. 29 (2013) 380-386.

16.  Yuna Wu, Hengcheng Liao^*, Jian Yang, Investigation on corrosion   behavior of as-extruded near eutectic Al-Si-Mg alloy by neutral salt spray test,   China Foundry. 10 (2013) 207-212.

17.  Yuna Wu, Hengcheng   Liao^*,   Kexin. Zhou, Effect of Si content on dynamic recrystallization of Al-Si-Mg alloys   during hot extrusion, Journal   of Materials Science & Technology, 30 (2014) 1271-1277.

18.  Yuna Wu, Hengcheng Liao^*, Jianfeng Zhang, Effect of Intermediate   Annealing Temperature and Aging on the Mechanical Properties and Conductivity   of Al-0.2Mg-0.35Si-0.3Ce Wire Rod, Springer-Verlag Singapore Pte Ltd,   Singapore, 2018. (ISTP)

19.    Yuna Wu^*, Hengcheng Liao, Jian Yang, Effect of   Quenching Wait Time on Microstructure and Mechanical Properties of   As-extruded AA6063 Alloy, ICAA13: 13^th International   Conference on Aluminum Alloys, Wiley Online Library,   Pittsburgh, 2012, pp.1593-1598. (ISTP)

20.    Hengcheng Liao^*, Yuna Wu, Kexin Zhou, Jian Yang, Hot deformation behavior and   processing map of Al-Si-Mg alloys containing different amount of silicon   based on Gleebe-3500 hot compression simulation, Materials & Design, 65 (2015) 1091-1099.

21.    Hengcheng Liao^*, Yuna Wu, Yongjin Wang, Microstructure evolution of   Al-0.35%Si-0.2%Mg alloy containing Ce during hot extrusion and its   contributions to mechanical and conductive properties. Journal of Materials Engineering and Performance, 2015, 24 (0): 2503-2510.

22.    Hengcheng Liao^*, Yuna Wu, Ran Fan, Qigui Wang, Effect of Sr content on porosity   formation in directionally solidified Al-12.3wt.%Si alloy. China Foundry, 2014, 11 (5): 435-439.

23.  Hengcheng Liao^*, Yuna Wu, Ke   Ding, Hardening response and precipitation behavior of Al-7%Si-0.3%Mg alloy   in a pre-aging process. Materials   Science and Engineering A, 2013, 560 (0): 811-816.

24.  Hengcheng Liao^*, Yuna Wu, Ke Ding,   Hardening response and precipitation behavior of Al-7%Si-0.3%Mg alloy, John   Wiley & Sons, Chichester, 2012. (ISTP)

个人主页